中文
English
Screw discharge kneader
Screw discharge kneader is mainly composed of five parts: mixing, screw extrusion, base, hydraulic system, transmission system and electric control system. The hydraulic system controls the large oil cylinder by one hydraulic station to complete the opening and closing function, and the hydraulic system controls the oil cylinder by one hydraulic station to complete the opening and closing functions. Screw discharge kneader is an important branch of kneader series. Widely used in plastic, rubber, food and pharmaceutical industries. The kneader completes the mixing and mixing of materials, and the materials are output by the screw at the bottom of the kneader. Screw can be divided into ordinary type, heating and cooling type, supercharging type by changing compression ratio and dispersion type.
Technical parameters of kneader |
|||||||||||
| model | JR5L | JR10L | JR100L | JR300L | JR500L | JR1000L | JR1500L | JR2000L | JR3000L | JR4000L | JR5000L |
| volume | 5L | 10L | 100L | 300L | 500L | 1000L | 1500L | 2000L | 3000L | 4000L | 5000L |
| Mode of heating | 1. Heat transfer oil heating 2. Electric heating 3. Steam heating | ||||||||||
| Host power (KW) | 0.75-1.5KW | 1.5-3KW | 4-11KW | 5.5-22KW | 11-45KW | 18.5-75KW | 45-90KW | 45-160KW | 45-160KW | 55-280KW | 90-355 |
| Screw motor power | 3—5.5 | 4—11 | 5.5—15 | 7.5—18.5 | 11—22 | 15—37 | 18.5—45 | 18.5—45 | 18.5—45 | ||
| Electric heating power | 1.8 | 4.2 | 12 | 18 | 36 | 45 | 54 | 72-84 | Can be customized for temperature | ||
| STEAM PRESSURE | 0.2-0.4 | ||||||||||
| Load Factor | ≦70% | ||||||||||
| speed | 41/26 | 41/26 | 36/22 | 36/22 | 36/25 | 36/25 | 36/25 | 30/22 | 30/22 | 27/22 | |
| vacuum degree | ≦0.095Mpa | ||||||||||
| Discharging mode | 1. Tripping cylinder discharging, 2. Screw discharging, 3. Discharging | 1. Screw discharging 2. Discharging | |||||||||
| Weight of equipment | 210-300 | 250-340 | 1100-1250 | 2000-2500 | 2800-3800 | 4200-4600 | 5200-5500 | 6400-6800 | 9000-9500 | 10000-11000 | 11000-13000 |
| Remarks | 1. Industry parameters are based on conventional design; 2. It can be customized according to material characteristics | ||||||||||
Message
Fill in your phone and email information, and we will contact you promptly to resolve your issue as soon as possible